Make a 3D printed cake pop mold

Turn any drawing into a cake pop cutter and plunger in the same shape, ready for your 3D printer.

Drop your drawing here

PNG, JPG, WebP, HEIC or a cookie cutter STL

Free to preview, no account needed.

Press. Lift. Push. Pop.

How to use your cake pop mold, from dough to stick. Roll your cake pop dough about 5/8 in thick first.

  1. 01

    Press

    Fingers on the wide flat base, press the cutter straight through the dough.

  2. 02

    Lift

    Lift it away. The shape comes up inside the cutter, the scraps stay behind.

  3. 03

    Push

    Push the plunger through. Its plate stops on the grip, right as the shape drops out.

  4. 04

    Pop

    Stand them in the stick holder, push the sticks in, then chill, dip and decorate. Every pop comes out the same shape.

A cake pop cutter and plunger. One zip.

Both are made from your drawing's outline, so the plunger (some call it a pusher) always fits the cutter.

  1. A wide flat base. Room all round for your fingers to press it down. Make it as wide as you like.
  2. Our cutting edge. The same sharp 0.6 mm edge as our cookie cutters.
  3. A snug fit. The plunger slides through without letting dough squeeze past.
  4. As long as the hole is deep. Change the depth and the plunger follows.
  5. A plate that stops. It rests on the base, so the shape ends level with the edge.

Optional

Add a cake pop stick holder

Tick one box and a third part joins the zip: a 3D printed holder that stands your cut pops up in a row, so every stick goes in straight.

  • You pick where the stick goes. Drag a dot round your shape, to the bottom, the top or a side, and the holder is shaped to match.
  • Ten pops in a row. 6.25 in long to start, made for 5/8 in dough. Change the length to hold more or fewer.
  • In and out easily. Pops drop straight in and lift straight out.
  • Prints flat. A flat base and open ends, with no supports.
Heart-shaped cake pops standing upside down in a row in a pink 3D printed cake pop stick holder, with sticks pushed into their points
The 3D viewer in cake pop mold mode: ticking Add a stick holder makes the holder appear beside the cake pop cutter and plunger, and unticking it takes it away
In the 3D viewer: tick Add a stick holder and the holder is made for your shape, ready to download with your mold.

Questions

Is it free?

Anyone can make and preview a cake pop mold, with no account. Downloading needs a free account: free members get 3 cake pop mold downloads every 30 days, and Premium ($12.99 a month or $99 a year) makes them unlimited.

How do you use a cake pop mold?

Roll your cake pop dough about 5/8 in thick. Press the cutter straight down with your fingers on its flat base, lift it away, then push the plunger through so the pop drops out. Stand the pops in the stick holder, push the sticks in, chill, then dip.

What cake pop shapes can I make?

Any shape you can draw or upload: hearts, Christmas trees, stars, snowmen, letters, a logo, or a cookie cutter STL you already have. Simple, chunky shapes make the neatest cake pops.

What size should I make it?

Most cake pops are 2 to 3 in across, so molds start at 2.5 in on the longest side. You can choose from 1.75 to 4 in. Very thin parts of a shape are rounded off the plunger so it doesn't snap.

What is the stick holder?

An optional third part. Tick "Add a stick holder" in the viewer, choose where the stick goes into your shape and how long the holder is, and it downloads in the same zip. Stand the cut pops in it and push each stick straight down.

Can I turn a cookie cutter STL into a cake pop mold?

Yes. Drop the STL here and we find its cutting edge, then build the cutter and plunger from that shape at cake pop size. You can also pick Cake pop mold from the menu at the top after opening an STL anywhere on the site.

Can I make a regular cookie cutter instead?

Yes. The menu at the top of the 3D viewer switches between a cookie cutter and a cake pop mold, and each keeps its own size.

How do I 3D print a cake pop mold?

Print every part flat side down in PLA or PETG at 0.2 mm layers, with no supports. Check that your filament is sold as food-contact safe, wash cutters by hand in warm (not hot) water, and keep them out of the dishwasher.

Your Christmas cake pop molds are a drawing away.

Choose a drawing