Salt Dough Ornaments: Easy Recipe and Custom Cookie Cutter Shapes

Make salt dough ornaments with 3 pantry ingredients, then cut them with custom cookie cutters made from your kid's drawing. Baking and sealing tips.

7 min read · Updated

Salt dough ornaments are the easiest homemade Christmas craft there is: three pantry ingredients, a rolling pin and a cookie cutter. This guide gives you a simple salt dough ornament recipe, exactly how long to bake them, how to seal them so they last for years, and how to cut them in any shape you want, even your kid's own drawing, with a 3D printed cookie cutter.

What you need for salt dough ornaments

For the dough (makes about 15 to 20 ornaments, 3 inches wide):

  • 2 cups all-purpose flour
  • 1 cup fine table salt
  • 3/4 cup warm water (plus up to 1/4 cup more if needed)

To shape and finish:

  • Rolling pin and parchment paper
  • Cookie cutters (store-bought or made from any drawing)
  • A drinking straw, for the hanging hole
  • Acrylic paint and small brushes
  • Clear sealer, such as Mod Podge or a clear acrylic spray
  • Ribbon or twine

Use fine table salt, not coarse or kosher salt. Big salt crystals leave a bumpy surface that's hard to paint.

Salt dough ornament recipe, step by step

  1. Heat the oven to 250°F (120°C). Line a baking sheet with parchment paper.
  2. Mix the flour and salt in a large bowl.
  3. Add the warm water a little at a time and stir until a dough forms. Knead it on the counter for 5 to 8 minutes until it's smooth and feels like play dough. Sticky? Add a spoonful of flour. Crumbly? Add a splash of water.
  4. Roll it out 1/4 inch thick. Thinner ornaments break; thicker ones take much longer to dry and are more likely to puff.
  5. Cut your shapes with cookie cutters. Dip the cutter in flour between cuts so the dough lets go cleanly.
  6. Make the hanging hole with a straw near the top of each shape. Make it a little bigger than you think, because it shrinks slightly as it bakes.
  7. Bake for 2 to 3 hours, flipping the ornaments halfway through (see below).
  8. Cool completely, then paint, seal and add ribbon.

How long to bake salt dough ornaments

Bake salt dough ornaments at 250°F (120°C) for 2 to 3 hours, flipping them after the first hour. They're done when they feel hard and sound hollow when you tap them. Thicker or bigger ornaments need longer.

Don't turn the oven up to save time. A hot oven is the main reason salt dough puffs up and cracks. Low and slow dries them out instead of cooking them.

No oven? You can air-dry them on a wire rack for 2 to 3 days, turning them once a day. Air-dried ornaments come out flatter but take patience.

Why salt dough ornaments puff or crack (and how to stop it)

  • They puffed up: the oven was too hot, or the dough was rolled too thick. Keep it at 250°F and 1/4 inch. Poking a few tiny holes with a toothpick before baking also helps air escape.
  • They cracked: usually too much heat, or the dough was too dry. Knead in a little more water next time and let them cool slowly in the oven with the door open.
  • The edges are ragged: the cutter was sticky or dull. Flour the cutter before every cut, and wipe off dough as it builds up.

How to seal salt dough ornaments so they last

Salt dough soaks up moisture from the air, which makes it soft and moldy over time. Sealing stops that.

  1. Let the paint dry fully, at least an hour.
  2. Brush on a coat of Mod Podge, or spray with a clear acrylic sealer.
  3. Seal every side, including the back, the edges and inside the hole. Any bare spot lets moisture in.
  4. Add a second coat once the first is dry.

Sealed salt dough ornaments last for years. Store them wrapped in tissue paper in a dry box, not in a damp basement or attic.

Salt dough ornament ideas for Christmas

Salt dough ornaments can be any shape your cookie cutter can make. Some family favorites:

  • Reindeer, Santa and gingerbread men. Our free Santa's Reindeer, Santa and Gingerbread Boy cutters are sized for ornaments and ready to 3D print.
  • Classic tree shapes. Try the Wonky Tree, Wonky Snowflake, Wonky Stocking or Wonky Candy Cane.
  • Cinnamon ornaments. Swap 1/4 cup of the flour for ground cinnamon for a warm brown color and a holiday smell. Bake them the same way.
  • Handprint ornaments. Press your child's hand into a circle of dough, or turn their traced hand into its own cutter (below).
  • Your kid's drawing. The most special one of all: their own drawing, turned into a real ornament.

Turn your kid's drawing into a salt dough ornament cutter

This is where salt dough ornaments go from cute to keepsake. With a 3D printer, any drawing can become a cookie cutter:

  1. Have your child draw a shape with a thick black marker on white paper. Simple, chunky outlines work best: a star, a pet, a snowman, their own name in bubble letters.
  2. Take a photo of it and upload it to Cerdafied Studio's image to cookie cutter tool. It traces the outline and builds a 3D cookie cutter for you to check from every side.
  3. Set the size. 3 to 3.5 inches is a great ornament size. Small enough to hang, big enough to paint.
  4. Download the STL and print it. A cutter prints in about an hour on most home printers.
  5. Cut your salt dough with it, add the year on the back with a toothpick, and bake.

Handprint tip: trace your child's hand on paper with a marker and upload that. You'll get a handprint cutter you can use every year to see how much they've grown.

Want the drawing's details pressed in too? The cookie cutter stamp maker makes a cutter plus a stamp that presses the drawing's inside lines (faces, buttons, stripes) into the dough. Those lines become a ready-made guide for painting.

You can also draw a shape from scratch in Create, or browse all our free cookie cutter designs.

Yes. Salt dough is just flour, salt and water, so it won't hurt a cookie cutter. Wash the cutter in warm, soapy water afterwards and it's ready for real cookies. Never put a 3D printed cutter in the oven or dishwasher, because the heat can warp the plastic.

Salt dough ornament safety

Salt dough ornaments are not edible, even though they look like cookies. They contain a lot of salt, which is dangerous for dogs and other pets. Hang them high on the tree, away from curious noses and little hands.

Salt dough ornaments FAQ

What is the best salt dough ornament recipe? Two parts flour, one part fine salt and about three-quarters of a part warm water: 2 cups flour, 1 cup salt, 3/4 cup water. It's simple, holds its shape and bakes flat.

How long do salt dough ornaments last? Sealed on every side and stored somewhere dry, they last for many years. Unsealed ones can soften or mold within a season or two.

Can you microwave salt dough ornaments? It's faster but riskier. Short bursts of 30 seconds on low can work for small, thin shapes, but they puff and crack much more often than oven-baked ornaments.

What paint do you use on salt dough ornaments? Acrylic craft paint works best. Seal over it once it's dry.

What size cookie cutter is best for ornaments? 2.5 to 3.5 inches across. With a custom cookie cutter you can set the exact size before you print.

Ready to make yours? Upload a drawing and turn it into a cookie cutter for this year's salt dough ornaments.